19
Note
1. The wire gauge for the terminal block should be in
the range of 12 ~ 24 AWG.
2. Alarm relay circuit accepts up to 30V, max. 3A
currents.
Fault Alarm Contacts
The Fault Alarm Contacts are
energized (CLOSE) for normal
operation and will OPEN when
failure occurs
Fault
2.2 Mounting Installation
This section describes how to install the Industrial 802.3at PoE Media
Converter and make connections to it. Please read the following topics
and perform the procedures in the order being presented.
Note
In the installation steps below, this Manual uses IGS-
801(PLANET 8 Port Industrial Gigabit Switch) as the
example. However, the steps for PLANET Industrial
Switch & Industrial Media/Serial Converter are similar.
The term
“Industrial Equipment”
in the following
section means PLANET Industrial devices mentioned
above.
Summary of Contents for IGTP-802T
Page 36: ......
