Planet IGTP-802T, User Manual, Page: 13 / 36

13
2. Installation
This product provides three different running speeds – 10Mbps,
100Mbps and 1000Mbps in the same Industrial 802.3at PoE Media
Converter and automatically distinguishes the speed of incoming
connection; this section describes the functionalities of IGTP-80xT’s
components and guides how to install it on the DIN Rail Basic
knowledge of networking is assumed. Please read this chapter
completely before continuing.
2.1 Product Description
The IGTP-80xT Industrial Gigabit Media Converter combines Ethernet
media conversion (from 1000BASE-X to 10/100/1000BASE-T) with
802.3at Power over Ethernet Plus (PoE+) injector to deliver both
up to 30 watts of power output and high data transmission speed to
PDs (powered devices) installed in a remote area where sufficient and
reliable power input is required. Its 1000BASE-X fiber optic uplink port
provides long distance, high speed and stable data transmission to a
remote core network. The special and convenient power system of the
IGTP-80xT supports
12~48V DC power input or 24V AC power input
for power redundancy and operational flexibility.
Being able to operate under the temperature ranging from - 40 to 75
degrees C and with an IP30 rugged case, the IGTP-80xT can be
placed in almost any difficult environment.
The maximum distance between a PoE PSE (power sourcing
equipment) and PD via Ethernet cable is 100 meters. To extend the
PoE deployment range, the IGTP-80xT is integrated with fiber interface
for farther distance applications. The IGTP-80xT’s fiber connector type
is as follows:
„
IGTP-802T Fiber SC connector supporting 1000BASE-SX multi-mode
and transmission distance up to 550m.
„
IGTP-802TS Fiber SC connector supporting 1000BASE-LX single-
mode and transmission distance up to 10km.
„
IGTP-805AT SFP slot supporting 100BASE-FX/1000BASE-X multi/
single mode SFP module and transmission distance up to 120km
(Varying on SFP module).