8
4. Terminal Setup
To configure the system, connect a serial cable to a
COM port
on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed Switch.
Console Port
115200,N,8,1
RJ45 to DB9 RS232 Cable
PC/Workstation with
Terminal Emulation Software
IGS Industrial Managed Switch
Serial Port
A terminal program is required to make the software connected to the Industrial
Managed Switch.
1. Run terminal program on the OS.
2. When the following screen appears, make sure that the COM port should be
configured as:
Baud: 115200
Parity: None
Data bits: 8
Stop bits: 1
Flow control: None
