14
3.2 Wall-mount Plate Mounting
To install the Industrial Gigabit Ethernet Switch on the wall, please
follow the instructions described below.
Step 1:
Remove the DIN-rail from the Industrial Gigabit Ethernet
Switch; loosen the screws to remove the DIN-rail.
Step 2:
Place the wall-mount plate on the rear panel of the Industrial
Gigabit Ethernet Switch.
Step 3:
Use the screws to screw the wall-mount plate on the
Industrial Gigabit Ethernet Switch.
Step 4:
Use the hook holes at the corners of the wall-mount plate to
hang the Industrial Gigabit Ethernet Switch on the wall.
Step 5:
To remove the wall-mount plate, reverse the steps above.
