8
4.1 Logging on to the Console
Once the terminal has been connected to the device, power on the
Industrial Managed Switch and the terminal will display “running testing
procedures”. Then, the following message asks to log in user name and
password. The factory default user name and password are shown in
Figure 4-1 below.
Username:
admin
Password:
admin
Figure 4-1:
Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
Note
1. For security reason,
please change and memorize
the new password after this first setup
.
2. Only accept command in lowercase letter under
console interface.
Summary of Contents for IGS-4215-16T2S
Page 20: ......
