1. INTRODUCTION
1.1 Packet Contents
Check the contents of your package for following parts:
▫
Industrial Media Converter x1
▫
DIN-Rail kit (screwed on the switch)
▫
Wall-mount kit (wall-mount plate with 6 screws)
▫
CD-ROM user's manual x1
If any of these are missing or damaged, please contact your dealer immediately, if possible, retain the
carton including the original packing material, and use them against to repack the product in case there is
a need to return it to us for repair.
1.2 How to Use This Manual
This User Manual is structured as follows:
Chapter 2,
HARDWARE NSTALLATION
The chapter explains the functions of the Converter and how to physically install the Converter.
Chapter 3,
NETWORK INSTALLATION
The chapter explains how to install the Converter in the network.
Chapter 4,
TROUBLE SHOOTING
The chapter explains how to trouble shooting of the Converter.
Chapter 5,
APPENDIX A Networking Connection
The chapter contains cable information of the Converter.
1.3 Product Feature
Hardware Feature:
▫
UTP to Fiber Media Converter
▫
Auto Negotiation Speed and Half / Full Duplex
▫
Support 12 to 48VDC power inputs
▫
TX port support Auto MDI/MDI-X
▫
Relay alarm output for port link failure
▫
IEEE 802.3x flow control support
▫
Flow control on full-duplex
▫
Back pressure on half-duplex
▫
Built-in Link Lose Forwarding Technology
