7
Interface
Description
Power Jack
The input power is DC 12V, 2A.
Note:
ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
RJ-45 LAN socket
Connect to PC or Hub/Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built auto-negotiaiton
protocol can detect or negotiate the transmission speed
of the network automatically. Please use CAT-5 cable to
connect the Network Camera to a 100Mbps Fast Ethernet
network switch or hub.
Note:
ONLY use one power source, either from DC or from
802.3af Power over Ethernet..
MicroSD Card Slot
The IP Camera has built-in a MicroSD card slot accepts
MicroSD memory card for image / video event recording.
Audio Out
Connect a loud speaker to the IP Camera. This is for voice
alerting and two-way audio.
Audio In
Connect a microphone to the IP Camera.
GPIO
The 7 pin terminal block includes 4 input ports and 1
output ports.
Terminal block for I/O connectors:
Name
Pin
Function
GND
1
Four sets of Digital Input, DI1 until DI4; the internal
device is also photo-coupled electrical relay. In practice,
the external device can be simply an On/Off switch.
Four sets of On/Off switch can be connected as
different trigger source.
Digital input 4
2
Digital input 3
3
Digital input 2
4
Digital input 1
5
DO_NO
6
Digital output implementation; Pin6 to COM (Pin7) is a
Photo-coupled relay on Normal Open status. External
device can directly connect to the terminals. However
the current that will go through the 2 nodes must
not exceed 130mA. An external “Relay” can also be
connected to the terminals as an implementation. In
this case, current (or/and voltage) limitation is specified
by the external Relay.
DO_COM
7
