Planet ICA-3250 User Manual Download Page 21

Page: 21 / 65

1080p IR Bullet PoE IP Camera

ICA-3250

- 21 -

Please make sure the IP address of PC is in the same subnet as device’s IP

address.

2.3.4 Remote Update Function



Device Update:

User can update firmware with the function. Please select a device

and click “Select File” to select the correct firmware, and then click ”Start Update” to

start to update the firmware.

1. Please make sure the firmware is correct. If the firmware is wrong, the device

might be damaged.

2. Do not do anything or power off device during the update process. It will damage

the device.



Import Config File:

User may upgrade from the previous saved setting. Please

select a device and click “Select File” to select the correct setting file, and then

click ”Import” to start to upgrade setting.



Restore Factory:

Delete all the settings in the device. Please select a device and

click “Restore Factory” to restore all settings to factory default setting.



Restore IP:

Restore IP address to default IP address. The default IP address is

192.168.0.20. (If there is no DHCP server in the network) Please select a device

and click “Restore IP” to restore default IP address.



Synchro Time:

Set device’s time to the same as PC’s. Please select a device and

Summary of Contents for ICA-3250


































































Search results

Summary of Contents for ICA-3250

Reviews:

Related manuals for ICA-3250

Brands by name

Popular brands

Planet ICA-3250, User Manual

Search results

Summary of Contents for ICA-3250

Reviews:

Related manuals for ICA-3250

Brands by name

Popular brands