background image

                                                                Full HD Ultra-mini Bullet IP Camera 

                                                                                                                                                    ICA-3200

 

 

 

DHCP 

Using DHCP, IP camera will get all the network parameters 

automatically. 

Static IP 

Please type in IP address, subnet mask, gateway, and DNS 

manually.

 

IPv6 Assignment 

IPv6 is a newer numbering system that provides a much larger 

address pool than IPv4, which accounts for most of today’s 

Internet traffic. You can set up IPv6 manually by keying in 

Address, Gateway, and DNS, or enabling DHCP to assign the 

IP automatically. 

Port Assignment 

User may need to assign a different port to avoid conflict when 

setting up IP assignment. 

(1) Web Page Port: setup web page connecting port and 

video transmitting port (Default: 80) 

(2) RTSP Port: setup port for RTSP transmitting (Default: 

554) 

(3) RTP Start and End Port: in RTSP mode, you may use TCP 

and UDP for connecting. TCP connection uses RTSP Port 

(554). UDP connection uses RTP Start and End Port. 

UPnP 

This IP camera supports UPnP. If this service is enabled on 

your computer, the camera will automatically be detected and 

a new icon will be added to “My Network Places.” 

 

33

Summary of Contents for ICA-3200




































































Reviews: