2
Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the ICA-302.
System Requirements
•
To use the LAN interface, a standard 10/100BaseT hub or switch is required.
•
System Requirement for viewer:
System
Hardware
•
Microsoft Internet Explorer 5.0 or later
•
VGA Monitor resolution 1024 x 768 (for
Master Vision)
•
Pentium III 800MHz or above
•
Memory Size: 128MB or above
•
VGA card resolution: 800x600 or above
•
Windows 2000, XP
Note: The listed information is minimum system requirements only.
Actual requirement will vary depending on the nature of your
environment.
L
Hint
Installation
STEP 1. Install the ICA-302 camera to a desired location
STEP 2. Plug-in Network Cable into a network device, ex: hub / switch.
STEP 3. Connect power adapter to provided power cable then to power socket.
STEP 4. If you need to control additional RS-485 device; connect RS485 two wires to
RS485, Red: D- , Blue: D+
STEP 5. If required, connect video BNC connector to local TV or monitor for displaing.
5
