PPPoE screen
The ICA-302 can directly connect to the ADSL, however, PPPoE setting should be
setup first in LAN environment, and then connect to the ADSL modem. Power on
again, then the ICA-302 will dial up to the ISP connect to the WAN through the ADSL
modem.
The procedures are as following:
• Connect ICA-302 to the LAN by DHCP or Fixed IP. Please refer to the
chapter 2
Basic Setup
Æ
Setup.
• Access the ICA-302 via web browser, enter Setting
Î
Network.
• Select “PPPoE Setting”.
• Input the “User” and “Password” which are provided by your local ISP.
• Select the “Send Mail after dialed”, and input the “Mail Server“ and the related
information fields.
• If the mail server needs authentication, then the check box of “Password” needs
to be checked, and input the password.
• Input both the “Sender email”, “Receiver email” is required.
• The “Subject” field can be modified.
• Select “Save” to save the setting.
• If the ADSL Modem and ICA-302 were connected with a hub, after all the
information were inputted, then you can press “Dial” to do the PPPoE dial.
29
