manualshive.com logo in svg

Planet HDP-1260PT, User Manual, Page: 53 / 74

Share
Download
Planet HDP-1260PT User Manual Download Page 53

 

1080p SIP Vandalproof Door Phone with RFID and PoE 

HDP-1260PT

 

53 

Identity Door Phone

 

Click “Submit” to identity Door Phone, then device will “beep” to help you 
know which door phone.

 

Access Card

 

To display and configure the card type and card register. 

 

Card Type

: IC&ID card. 

Password

: RFID card is not needed.

 

Search By Room Number: 

search feature.

 

Card register: 

Card user type includes Normal, Admin, Temp. 

 

Note: 

Admin card only for card issuing and card revoking; cannot be used for 

opening the door. Temp card valid date from 30min to 1 month.

 

Open Door By HTTP

 To configure the open door via http protocol. 

 

 

4.5.11 Alarm 

 

 

Tamper Detection

 

Tamper Detection

: default is Disable (Enabled or Disabled).

 

Send Message

: send message after door phone is dismantled.

 

Alarm Command

: default is Alarm_Tamper.

 

Reset Command

: default is Reset_Tamper.

 

Alarm Status Reset

: To reset via Web.

 

Ring Type

: default

 

Alarm Server

 

To configure Alarm Server Address, it will auto send message to 
configured server once alerted.

 

 

Summary of Contents for HDP-1260PT











































































Reviews:

No comments