Planet HDP-1260PT, User Manual, Page: 14 / 74

1080p SIP Vandalproof Door Phone with RFID and PoE
HDP-1260PT
14
Number Description
Wiring Port Description
(example above)
1
Ethernet interface: Standard RJ45 interface, 10/100M
adaptive; it is recommended to use Cat 5e of cable
Internet RJ45/PoE
2 Power interface: DC 12V,1A input
Left: 12V+
Right: 12V-GND
3, 5
Two groups of short-circuit input detection interfaces:
For connecting switches, infrared probes, door magnets,
vibration sensors and other input devices
Left: IN
Right: GND
4 ,6
Two groups of short-circuit output control interface: Used
to control electric locks, alarms, etc.
Left (NC): Normally Close Contact
Center (COM): Common Contact
Right (NO): Normally Open Contact
7, 8
Door Sensor Detection: Two groups of gate door
magnetic detection
Left: DET-In
Right: GND
9
Record Out interface: Mix the device and the sound of
the far-end call. One is the recording signal line, and the
other is the ground line.
(Please be sure to ground the line, otherwise there will
be noise.)
Left: Line2-OUT
Right: GND
10
Audio Out interface: External active speakers for audio
power amplification. One is the audio signal line, and the
other is the ground line.
(Please be sure to ground the line, otherwise there will
be noise.)
Left: Line1-OUT
Right: GND
11
MIC In interface: Mix the device and the sound of the
far-end call. One is the MIC signal line, and the other is
the ground line.
Left: MIC+
Right: MIC-