Planet GSW-24040R User Manual Download Page 209

Page: 209 / 567

User’s Manual of SGSW-24040 / 24240 Series

209

: ARP frames where SHA is not equal to the SMAC address.

: ARP frames where SHA is equal to the SMAC address.

Any

: Any value is allowed ("don't-care").

•

RARP SMAC Match

Specify whether frames can hit the action according to their target hardware

address field (THA) settings.

: RARP frames where THA is not equal to the SMAC address.

: RARP frames where THA is equal to the SMAC address.

Any

: Any value is allowed ("don't-care").

•

IP/Ethernet Length

Specify whether frames can hit the action according to their ARP/RARP

hardware address length (HLN) and protocol address length (PLN) settings.

: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is

equal to IPv4 (0x04) must not match this entry.

: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is

equal to IPv4 (0x04) must match this entry.

Any

: Any value is allowed ("don't-care").

•

Specify whether frames can hit the action according to their ARP/RARP

hardware address space (HRD) settings.

: ARP/RARP frames where the HLD is equal to Ethernet (1) must not match this

entry.

: ARP/RARP frames where the HLD is equal to Ethernet (1) must match this

entry.

Any

: Any value is allowed ("don't-care").

•

Ethernet

Specify whether frames can hit the action according to their ARP/RARP protocol

address space (PRO) settings.

: ARP/RARP frames where the PRO is equal to IP (0x800) must not match this

entry.

: ARP/RARP frames where the PRO is equal to IP (0x800) must match this

entry.

Any

: Any value is allowed ("don't-care").



IP Parameters

The IP parameters can be configured when Frame Type "IPv4" is selected.

Object

Description

•

IP Protocol Filter

Specify the IP protocol filter for this ACE.

Any

: No IP protocol filter is specified ("don't-care").

Specific

: If you want to filter a specific IP protocol filter with this ACE, choose this

value. A field for entering an IP protocol filter appears.

ICMP

: Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for defining

ICMP parameters will appear. These fields are explained later in this help file.

Summary of Contents for GSW-24040R
























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for GSW-24040R

Reviews:

Brands by name

Popular brands

Planet GSW-24040R, User Manual

Search results

Summary of Contents for GSW-24040R

Reviews:

Brands by name

Popular brands