User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.5.2 Per Port Configuration
The VLAN per Port Configuration page contains fields for managing ports that are part of a VLAN. The port default VLAN
ID (PVID) is configured on the VLAN Port Configuration page. All untagged packets arriving to the device are tagged by
the ports PVID. The screen in Figure 4-10 appears.
Figure 4-10
VLAN Port Configuration
The page includes the following fields:
•
VLAN Type
There’re two VLAN mode support – 802.1Q VLAN and Port-Bas VLAN
•
802.1Q
– Packets income will be tagged with VID as the PVID setting. All ports
on the switch belong to default VLAN (VID 1).
•
Port-Base
- Packets can only be broadcast among other members of the
same VLAN group. Note all unselected ports are treated as belonging to the
default system VLAN.
If port-based VLAN are enabled, then VLAN-tagging feature is ignored.
•
Port
Select the physical interface for which you want to display or configure data.
•
Link Type
Allow 802.1Q Untagged or Tagged VLAN for selected port.
When adding a VLAN to selected port, it tells the switch whether to keep or
remove the tag from a frame on egress.
•
Untag:
outgoing frames without VLAN-Tagged.
•
Tagged:
outgoing frames with VLAN-Tagged.
•
Ingress Filtering
Enable
Enabled
- the frame is discarded if this port is not a member of the VLAN with
which this frame is associated. In a tagged frame, the VLAN is identified by the
VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified
for the port that received this frame.