Planet FSD-401SC, Manual

Page: 15 / 26

SOHOConnect Series 10
Configuration
100Mbps Server to 10/100Mbps Hub
Plug one end of the Category 5 UTP Cable into any one port of the
Switch, and the other end of this cable into the RJ-45 of Fast Ethernet
Adapter in the server. The cable length between these 2 connecting
points should not exceed 100 meters.
Plug one end of the Category 3/5 UTP Cable into “Uplink” port of the
Switch, and the other end of this cable into any port of the 10/100Mbps
Ethernet hub. The cable length between these 2 connecting points
should not exceed 100 meters.
Figure 3. 100Mbps File server to Hubs Connection
Connect to 10/100Mbps Hub
Plug one end of the Category 5 UTP Cable into one port of the Switch,
and the other end of this cable into “Uplink” port of the 100Mbps Fast
Ethernet Hub. The cable length between these 2 connecting points
should not exceed 100 meters.
Plug one end of the Category 3 UTP Cable into one port of the Switch,
and the other end of this cable into “Uplink” port of the 10Mbps
Ethernet Hub. The cable length between these 2 connecting points
should not exceed 100 meters.
Connect to 100Base-FX Switch/Device
Plug the pair the fiber-cable to the Switch’s port 5, secure the fiber-
optic connector. Connect the other end to the fiber-optic port of the