16
Parameters
Description
ULP
It means the port corresponding to the PSE is lightly loaded
and the port stops powering (When the current on the network
is less than 7.5mA, the PSE thinks the PD has been dialed out
and the port stops powering).
SCP
It means the port corresponding to the PSE appears to be
short-circuited and the port stops powering.
OFF
It means the white and blue OFF shows that the port is blocked
by the menu command.
---W
It means the port is without a PD device insert.
---M
It means this port does not have data transfers.
<1m
It means this port data rate transfers less than 1m.
33m
(example)
The white and blue character represents the data transmission
rate while the red character represents the data transmission
rate which is greater than the bandwidth setting, causing power
to restart the PSE port. If the resumption situation happens for
10 times within 1 hour, the power supply to the port will be cut
off.
PB
It means power budget.
TB
It means total PoE power output information.
PD
The number of PDs inserted.
2.1.2 LED Indicators
System
LED
Color
Function
PWR
Green
Lights to indicate that the Switch has power.
10/100Mbps PoE Ports
LED
Color
Function
LNK/ACT
Green
Lights
Indicates the link through that port is
successfully established at 10/100Mbps.
Blinks
Indicates that the Switch is actively sending
or receiving data over that port.
PoE-in-Use
Orange
Lights
Indicates the port is providing 53V DC in-line
power.
Off
Indicates the connected device is not a PoE
powered device (PD).
