Planet DrView User Manual Download Page 47

Page: 47 / 55

will be recorded as “

Lost

”.

(2) “Not Found”:

The file has been scheduled to be backuped and backup is not

finished. However, you can’t find this file in DVR any more. Then, this file

will be recorded as “

Not Found

”.

(3) “ CRC Error”:

The size of file which is successfully backuped is not the as

the one of file in DVR. Then, this file will be recorded as “

CRC Error

”.

(4) “ Recycle”:

The files are successfully backuped but these files are

overwritten (Recycle) because the size of HDD is not enough. Then, this

file will be recorded as “

Recycle

”.

After finishing the “

Files check

” and finding unhealthy files (Lost, Not Found,

CRC Error), the system will show the following dialog box. User can decide to

download these unhealthy files again or ignore these files. If user decides to

ignore these files, the system will not mark them as unhealthy file any more

when he executes “

Files check

” next time.

Summary of Contents for DrView
























































Search results

Summary of Contents for DrView

Reviews:

Related manuals for DrView

Brands by name

Popular brands

Planet DrView, User Manual

Search results

Summary of Contents for DrView

Reviews:

Related manuals for DrView

Brands by name

Popular brands