DH-1600/DH-2400 User’s Manual
9
LEDs
Status
Descriptions
LNK/Act
(Link/ Activity
LED)
Steady
Green
/
Blinking
Green
Each RJ45 station port on the hub is
assigned an LED light for monitoring port
"Good Link and Activity". Each LED is
normally OFF after the power on
operation, but will light up steadily to
show “Good Link”.
And flash to show that the receiving
signals are passing into the hub.
100Mbps
Steady
Orange
Lit indicates 100Mbps device connected
Off indicates 10Mbps device connected
Table 1. Status of LED Indicators
Rear Panel
On the rear panel there is a power AC power connector , power
switch, reset button and one expansion slot. The following
describes the function of each connector and switch.
Figure 3 Rear panel of DH-1600 / DH-2400