Field
Description
router does not detect the flow of the user continuously,
the router automatically disconnects the PPPoE
connection.
WAN IP Settings
Type
You can choose
Fixed IP
or
DHCP
.
If select
Fixed IP
, you should enter the local IP
address, remote IP address and subnet mask.
If select
DHCP
, the router is a DHCP client, the WAN
IP address is assigned by the remote DHCP server.
Local IP Address
Enter the IP address of WAN interface provided by your
ISP.
Remote IP Address
Enter the gateway IP address provided by your ISP.
Netmask
Enter the subnet mask of the local IP address.
Unnumbered
Select this checkbox to enable IP unnumbered function.
Add
After configuring the parameters of this page, click it to
add a new PVC into the
Current ATM VC Table
.
Modify
Select a PVC in the
Current ATM VC Table
, and then
modify the parameters of this PVC. After finishing, click it
to apply the settings of this PVC.
Current ATM VC Table
This table shows the existed PVCs. It shows the interface
name, channel mode, VPI/VCI, encapsulation mode,
local IP address, remote IP address and other
information. The maximum item of this table is eight.
Click it, the
PPP Interface-Modify
appears. You can
modify the PVCs’ parameters.
Click
in the
PPPoE
mode, the page shown in the following figure appears. In this page,
you can configure parameters of this PPPoE PVC.
41
