check (
) before its name. If the wireless access point is not reachable, a red check (
)
will be displayed before its name.
If you want to change the connection parameters of a specific profile, just select it and click
‘Edit’ button, you’ll be prompted to input the connection parameters, just like you’re creating a
new profile.
If you no longer need a profile, select the profile then click ‘Delete’.
3-1-2 Using 802.1x – Certification
After you click ‘802.1x Setting’, a new window will appear:
Parameter Description
Authentication Type
hentication protocols this card has supported are included as
EAP &TTLS
– PEAP and TTLS are similar and easier than TLS in that
The EAP aut
follows. This setting has to be consistent with the wireless APs or Routers
that the card intends to connect.
P
they specify a stand-alone authentication protocol be used within an
encrypted tunnel. TTLS supports any protocol within its tunnel, including
CHAP, MS-CHAP, MS-CHAPv2, PAP and EAP-MD5. PEAP specifies that
an EAP-compliant authentication protocol must be used; this card
supports EAP-MSCHAP v2, EAP-TLS/Smart card and Generic Token
Card. The client certificate is optional required for the authentication.
