Planet Networking & Communication wnap-7325, User Manual, Page: 59 / 95

User Manual of WNAP-7325/WNAP-7335
-58-
Service

Type
Select QoS type IP Address or Mac Address .

Local IP Address
The IP address segment which uses this QoS rule.

MAC Address The Mac address which uses this QoS rule.

Uplink BandWidth
(Kbps)
Set the maximum uplink bandwidth allowed by the listed QoS rules.

Downlink
BandWidth (Kbps)
Set the maximum downlink bandwidth allowed by the listed QoS rules.

Comment
Set a name for the rule.
5.1.20 SNMP
Click “ Operation Mode ”  “ AP Router ” or “ Wireless ISP ” and then enter the “ SNMP ” by clicking the Setup
button next to it. This section allows you to configure the SNMP.
Figure 5-32 SNMP Settings
Object Description

SNMP
Enable or disable the SNMP service.

Read Community
Enter a Read Community name for verification with the SNMP manager
for SNMP Read requests.

Write Community
Enter a Write Community name for verification with the SNMP manager
for SNMP Write requests.

Trap IP 1 Enter the Trap IP address.

Trap Community
Enter an SNMP Trap Community name for verification with the SNMP
manager for SNMP Trap requests.