Command Guide of WGSW-48040HP
any
any security model
v1
v1 security model
v2c
v2c security model
v3
v3 security model
level
security level
auth
authNoPriv Security Level
noauth
noAuthNoPriv Security Level
priv
authPriv Security Level
read
specify a read view for the group
<ViewName : word255>
read view name
write
specify a write view for the group
<WriteName : word255>
write view name
Default:
None
Usage Guide:
To configure the
Access
of
SNMP
Example:
To configure the
Access
(below table) of
SNMP
Switch# configure terminal
Switch (config)#
snmp-server access default_rw_group model v2c level priv read
default_view write default_view
4.2.159 snmp-server community
Command:
snmp-server community { v2c <comm> [ ro | rw ] | v3 <v3_comm> [ <v_ipv4_addr>
<v_ipv4_netmask> ] }
snmp-server
Set SNMP server's configurations
community
Set the SNMP community
v2c
SNMPv2c
<comm>
Community word
ro
Read only
rw
Read write
v3
SNMPv3
<V3Comm : word127>
Community word
-252-
Summary of Contents for WGSW-48040HP
Page 1: ......
