manualshive.com logo in svg

Planet Networking & Communication wgsw-28040, User Manual

Share
Download
Planet Networking & Communication wgsw-28040 User Manual Download Page 100

User’s Manual of WGSW-28040 

 

This section has the following items: 

 

Management VLAN 

Configures the management VLAN. 

 

Create VLAN 

Creates thn VLAN group. 

 

Interface Settings 

Configures mode and PVID on the VLAN port. 

 

Port to VLAN 

Configures the VLAN membership. 

 

Port VLAN Membership 

Display the VLAN membership. 

 

Protocol VLAN Group 
Setting 

Configures the protocol VLAN group. 

 

Protocol VLAN Port 
Setting 

Configures the protocol VLAN port setting. 

 

GVRP Setting 

Configures GVRP global setting. 

 

GVRP Port Setting 

Configurs GVRP port setting. 

 

GVRP VLAN 

Display the GVRP VLAN database. 

 

GVRP Statistics 

Display the GVRP port statistics. 

 
 

4.5.2 IEEE 802.1Q VLAN   

In large networks, routers are used to isolate broadcast traffic for each subnet into separate domains. This Managed Switch 

provides a similar service at Layer 2 by using VLANs to organize any group of network nodes into separate broadcast domains. 

VLANs confine broadcast traffic to the originating group, and can eliminate broadcast storms in large networks. This also 

provides a more secure and cleaner network environment.   

An IEEE 802.1Q VLAN is a group of ports that can be located anywhere in the network, but communicate as though they belong 

to the same physical segment.   

VLANs help to simplify network management by allowing you to move devices to a new VLAN without having to change any 

physical connections. VLANs can be easily organized to reflect departmental groups (such as Marketing or R&D), usage groups 

(such as e-mail), or multicast groups (used for multimedia applications such as videoconferencing).   

VLANs provide greater network efficiency by reducing broadcast traffic, and allow you to make network changes without having 

to update IP addresses or IP subnets. VLANs inherently provide a high level of network security since traffic must pass through 

a configured Layer 3 link to reach a different VLAN.   

This Managed Switch supports the following VLAN features:   

 

Up to 255 VLANs based on the IEEE 802.1Q standard   

 

Port overlapping, allowing a port to participate in multiple VLANs   

 

End stations can belong to multiple VLANs   

 

Passing traffic between VLAN-aware and VLAN-unaware devices   

 

■ 

IEEE 802.1Q Standard 

IEEE 802.1Q (tagged) VLAN

 are implemented on the Switch. 802.1Q VLAN require tagging, which enables them to span the 

 

100 

 

Summary of Contents for wgsw-28040





























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands