Command Guide of MGSW-28240F
Default:
None
Usage Guide:
To configure
EEC options
of
network-clock
Example:
To configure
EEC options
(eec1) of
network-clock
Switch# configure terminal
Switch (config)#
network-clock option eec1
4.2.161 network-clock selector
Command:
network-clock selector { { manual clk-source <clk-source : 1-2> } | selected |
nonrevertive | revertive | holdover | freerun }
network-clock
network-clock
selector
Selection mode of nominated clock sources
freerun
Selector is forced in free run
holdover
Selector is forced in holdover
manual
Selector is manually set to the chosen clock source
<clk-source : 1-2>
Clock source number
clk-source
clk-source - commands related to a specific clock source
nonrevertive
Selector is automatically selecting the best clock source - non revertively
revertive
Selector is automatically selecting the best clock source - revertively
selected
Selector is manually set to the pt. selected clocfk source (not possible in unlocked mode)
Default:
None
Usage Guide:
To configure
Clock Selection Mode
of
network-clock
Example:
To configure
Clock Selection Mode
(Forced Free Run) of
network-clock
-261-
