Command Guide of MGSW-28240F
<flow >
The flow instance number when not in the port domain.
vid
In case the MEP is a port Up-MEP or a EVC customer MIP the VID must be given.
<Vid : vlan_id>
The port Domain MEP VID. This is required for a Port Up-MEP.
Default:
None
Usage Guide:
To configure
Up-MEP
of
MEP
.
Example:
To configure
Up-MEP
of
MEP 2
as below table
Switch# configure terminal
Switch (config)#
mep 2 up domain port vid 1 flow 1 level 2 interface GigabitEthernet
1/1
4.2.136 mep <Instance> vid
Command:
mep <Instance>
vid <vid>
mep
Maintenance Entity Point
<Instance>
The MEP instance number.
vid
The MEP VID
<Vid : vlan_id>
The MEP VID value
Default:
0
Usage Guide:
To set
VID
of
MEP
.
Example:
To set
VID
(8)
of
MEP 1
.
-246-
