User’s
Manual
of
ICA
‐
HM227W
12
"
NOTE
These LEDs can be switched off regardless the operation status of IP camera in IP
camera’s configuration menu. This will be helpful if you don’t want other people to
know the operation status of this IP camera
Rear Panel
Button Description
Button
Function
WPS
Press the WPS button and hold it for 3 seconds to enable the WPS
function, the LED will flashed very fast which means connecting. When
connect with the router, the LED flashed will be slow down means
connect successful.
Reset
Press the button and hold it for 10 second to reset the camera settings to
factory default value
Physical Interfaces
Connector
Function
Power Connector
The input power is 12VDC, 2A.
Audio Connector
Connects to external audio amplifier to output voice. Use 3.5mm audio cable.
DI/DO PIN ASSIGNMENT
Item
Description
DI/DO
Digital input / output dry contacts.
Connects to external peripherals by
wire. To insert or release a wire, press GND
Signal ground (Right)
Power Connector
Audio Connector
WPS/ Reset Button
Antenna Base
LAN
DI/ DO
SD/ SDHC Card Slot
