manualshive.com logo in svg

Planet Networking & Communication ICA-8500, User Manual, Page: 42 / 69

Share
Download
Planet Networking & Communication ICA-8500 User Manual Download Page 42

                                              5 Mega-pixel PoE / Wireless Fish-Eye IP Camera 

                                                                                                                                      ICA-8500/ICA-W8500

 

3.5.3 DDNS Tab

 

 

 

 The 

DDNS

 tabbed pane allows you to configure the Dynamic Domain Name System of your 

network device with a host name instead of the IP Address. 
 

DDNS Enable 

Enable the check box to support DDNS function. 

This model adds Planet easy DDNS that when this function is enabled, 
its hostname with PLANET DDNS will occur, and six of MAC will be 
ended automatically. User don’t go to web of 

www.planetddns.com

 to 

apply new account. 

Host Name 

Enter the host name which you registered and got through DNS Service 
Provider. The assigned host name is used to access the network device 
instead of IP Address. 

User 
Name/Password 

Account authentication for logging into the website of DNS Service 
Provider. 

Update Time 

Define a time interval for the device to periodically update and check its 
access status with website of DNS Service Provider. 

 

42

Summary of Contents for ICA-8500






































































Reviews:

No comments