manualshive.com logo in svg

Planet Networking & Communication ICA-8500, User Manual, Page: 14 / 69

Share
Download
Planet Networking & Communication ICA-8500 User Manual Download Page 14

                                              5 Mega-pixel PoE / Wireless Fish-Eye IP Camera 

                                                                                                                                      ICA-8500/ICA-W8500

 

5 DO_NO2 

6 DO_COM 

7 DO_NO1 

exceed 130mA. An external “Relay” can also be connected to the 
terminals as an implementation. In this case, current (or/and 
voltage) limitation is specified by the external relay.

 

 

2.2 Hardware Installation

 

 
2.2.1 Wall, Ceiling Mounting Installation

 

 

Step 1.

 Stick the given mounting label at the installation location. 

 

Step 2.

 Take the wall mount bracket, put it on the target place and fix it with the supplied screws 

(total of 2). 

 

Step 3.

 Load the camera into the wall mount. Be sure the camera is mated with two fixed screws,   

and rotate the camera clockwise to lock it in position. 

 

 

 

14

Summary of Contents for ICA-8500






































































Reviews:

No comments