Planet Networking & Communication ICA-8350 User Manual Download Page 34

Page: 34 / 103

3Mega-Pixel Vandal Proof Fish-Eye IP Camera

ICA-8350

: Enable audio uploading function.

ActiveX Control

The plug-in ActiveX control supports a lot of functions by clicking the
left mouse button. Note that this feature only supports on the ActiveX
control within Microsoft® Internet Explorer.

This function is detail setting for the camera that only available for
user logged into camera as administrator.

Item

Action

Network

Configure Network settings such as IPv6, ONVIF,
DHCP, DDNS, 3GPP, PPPoE and UPnP.

Camera

Adjust camera parameters.

System

Configure system information, date & time,
maintenance, and view system log file.

Video

Configure bit rate and frame rate of video
profiles.

Audio

Configure audio parameters.

User

Setup user name, password and login privilege.

Protocol

Setup ONVIF and SNMP configuration.

E-Mail

Setup E-Mail configuration.

Object Detection

Setup Object detection.

Storage

Status and configuration of SD card and Samba
server.

Continuous
Recording

Files list inside the SD Card and Samba server.

Recording List

Files list inside the SD Card.

Event Server

Setup FTP/TCP/HTTP/Samba server for event

Setting Menu

Event Schedule

Configure the schedule while event triggered.

Streaming
Protocol

User can select proper streaming protocol according to networking
environment.

Language

The device could provide multiple languages to meet customer’s
requirement.

Summary of Contents for ICA-8350








































































































Search results

Summary of Contents for ICA-8350

Reviews:

Related manuals for ICA-8350

Brands by name

Popular brands

Planet Networking & Communication ICA-8350, User Manual

Search results

Summary of Contents for ICA-8350

Reviews:

Related manuals for ICA-8350

Brands by name

Popular brands