manualshive.com logo in svg

Planet Networking & Communication ICA-5260V, User Manual

Share
Download
Planet Networking & Communication ICA-5260V User Manual Download Page 8

 

60fps Full HD Vandalproof IR IP camera 

 

ICA-5260V 

 

 

8 

Flexible Installation and Power Functionality 

The ICA-5260V incorporate Power over Ethernet which supplies power to the camera via the 
network, eliminating the need for power cables and reducing installation costs. The ICA-5260V are 
ONVIF-compliant and therefore interoperable with other manufacturer’s products. It also includes 
64-CH central management software. The ICA-5260V are indisputably the top choice for reliable 
and high performance surveillance.

 

 

 

Face Detection detects face and ignores anything else, such as buildings, cars and bodies. When a 

Face Detection is Saved on SD card When Network Connection is Lost 

suspect enters a targeted area, his face is caught in the camera, thereby triggering an alarm, which 
is then sent to the adminstrator via e-mail, FTP or Samba. It is thus saved on the SD card even 
though the network is disconnected.

 

 

Summary of Contents for ICA-5260V













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands