60fps Full HD Vandalproof IR IP camera
ICA-5260V
Your WAN IP address will be listed here.
3.
a series of
ice are blocked from access over the Internet.
over the Internet. This is accomplished using the
Open/set Virtual Server Ports to enable remote image viewing
The firewall security features built into the router and most routers prevent users from accessing the
video from the device over the Internet. The router connects to the Internet over
numbered ports. The ports normally used by the dev
Therefore, these ports need to be made accessible
Virtual Server
function on the router. The Virtual Server ports used by the camera must be opened
through the router for remote access to your camera.
Follow these steps to configure your router’s Virtual Server settings
z
Click
Enabled
.
z
Enter a unique name for each entry.
z
Select
Both
under
Protocol Type
(
TCP
and
UDP
)
z
Enter your camera’s local IP address (
192.168.0.100
, for example) in the
Private IP
field.
z
If you are using the default camera port settings, enter
80
into the
Public
and
Private
Port
section and click
Add
.
A check mark appearing before the entry name will indicate that the ports are enabled.
1.
Some ISPs block access to port 80. Be sure to check with your ISP so that you
can open the appropriate ports accordingly. If your ISP does not pass traffic on port
80, you will need to change the port the camera uses from 80 to something else,
such as 8080. Not all routers are the same, so refer to your user manual for specific
instructions on how to open ports.
70
