Planet Networking & Communication ICA-4210P User Manual Download Page 76

Page: 76 / 93

60fps Full HD IR IP Camera with Remote Focus and Zoom

ICA-4210P

Name

User can specify multiple HTTP servers as wish. Therefore,
user needs to specify a name for each HTTP server setting.

URL

Type the server name or the IP address of the HTTP server.

Test

Check the HTTP server whether it is available or not.

HTTP Login Name

Type the user name for the HTTP server.

HTTP Login Password

Type the password for the HTTP server.

Proxy Address

Type the server name or the IP address of the HTTP Proxy.

Proxy Login Name

Type the user name for the HTTP Proxy.

Proxy Login Password

Type the password for the HTTP Proxy.

Proxy Port

Set port number of Proxy.

3.17.4 SAMBA Server

The device also can send video stream to the specified SAMBA server. Most of the times, the
SAMBA server will be another PC or NAS server.

Name

User can specify multiple HTTP servers as wished. Therefore,

user needs to specify a name for each HTTP server setting.

SAMBA Server

Type the server name or the IP address of the SAMBA server.

Test

Check the SAMBA server whether this account is available or

not.

SAMBA Login name

Type the user name for the SAMBA server.

Summary of Contents for ICA-4210P






























































































Search results

Summary of Contents for ICA-4210P

Reviews:

Related manuals for ICA-4210P

Brands by name

Popular brands

Planet Networking & Communication ICA-4210P, User Manual

Search results

Summary of Contents for ICA-4210P

Reviews:

Related manuals for ICA-4210P

Brands by name

Popular brands