3 Mega-pixel Remote Focus Bullet IR IP Camera
ICA-3350P
48
Enable Schedule
Time
Check this box and this event will be activated when designated
weekday and time is reached. You also have to check weekday box,
and select time from dropdown list. If you select
‘Always’
as time,
this event will be activated during all the day.
Enable FTP
Check this box and IP camera will save file on FTP server (refer to
‘FTP Server’
setting in
‘Event Server’
tab) when this event is
activated.
Enable EMAIL
Check this box and IP camera will send an Email to designated
recipient address (refer to
‘SMTP Server’
setting in
‘Event Server’
tab) when this event is activated.
Enable Samba
(Net Storage)
Check this box and IP camera will save file on samba server (refer to
‘Samba Server’
setting in
‘Event Server’
tab) when this event is
activated.
Enable SD CARD
Check this box and IP camera will save file on SD card when this
event is activated. A working SD card must be inserted into IP
camera in advance.
Trigger Digital
Output for xx
Second(s).
Check this box and IP camera will trigger digital out to ‘high’ state for
xx seconds when this event is activated, where ‘xx’ seconds must be
defined by the dropdown list.
z
Media
You can define what kind of media file should be saved on the designated media.
One Snapshot
Save a picture file when event is triggered.
This function will be enabled while “
MJPEG codec
” is
set as enable on the “
Video Setting
”.
H.264 Video
Save a H.264 video clip. You can also select the recording length
before and / or after the time when event is triggered in
‘Pre Event’
and
‘Post Event’
.
For example, if you set
‘Pre Event’
to
‘5’
and
‘Post Event’
to
‘5’,
and an event is triggered at 14:10:30, then the video file will be 10
seconds long, starting from 14:10:20 to 14:10:30.
Tips: You may want to know what happened before event is
triggered in many cases, especially when object is outside of
motion detection window.