manualshive.com logo in svg

Planet Networking & Communication ICA-3350P, User Manual, Page: 12 / 67

Share
Download
Planet Networking & Communication ICA-3350P User Manual Download Page 12

 

3 Mega-pixel Remote Focus Bullet IR IP Camera 

ICA-3350P

 

 

 

12

2.1.2 Identification of ICA-3350P cable 

 

 

Interface 

Description

 

1 - RS-485 & digital I/O 

+ : RS485+ 
- : RS485- 
1 : DO 
2 : GND 
3 : DI 

2 - Power 

DC power input, connect to AC power adapter 

3 - Reset 

Reset IP cam to default setting 
User could follow the steps to restore the device to factory 
default setting: 
1.  Power on the camera and wait a while until the boot 

procedure finish. 

2.  Press the hardware reset button over 10 seconds, and 

release it. 

3.  Camera will reboot and restore to factory default setting.

4 - Audio output 

Connects to external audio amplifier or speakers with built-in 
amplifier. May require appropriate audio jack converter 
(depends on the type of amplifier / speaker you’re using). 

5 - Audio input 

Connects to audio peripheral for audio input, like 
microphone or other audio devices 

6 - Ethernet (POE supported) 

Connects to your local area network by Ethernet cable. 
Orange LED : Power on. 
Green LED: Ethernet cable is connected. 

7 - TV output 

Connects to TV 

 

 

ONLY use package power adapter supplied with the Internet. Otherwise, the 
product may be damaged. 

 

2.2 Hardware Installation 

2.2.1 Physical Installation 

1. Connecting an Ethernet cable   

Connect the LAN cable on the camera to PC.   

 

Summary of Contents for ICA-3350P




































































Reviews:

No comments