manualshive.com logo in svg

Planet Networking & Communication ICA-3260, User Manual, Page: 56 / 88

Share
Download
Planet Networking & Communication ICA-3260 User Manual Download Page 56

 

60fps Full HD IR Bullet IP Camera 

ICA-3260

 

Resolution 

Resolution of the selected profile. 

Rate Control

 

Defines the rate control method of this profile. There are three 

options: Constant Bit Rate (CBR), Variable Bit Rate (VBR), and 

Enhanced Variable Bit Rate (EVBR).   

For CBR, the video bit rate is between low and high bandwidth 

based on different resolutions. User can set the desired bit rate to 

match the limitation of bandwidth.   

For VBR, user should choose the quality level to set the video quality 

rather than bit rate. The quality level is between 1 and 100. The 

higher value can reach the better quality but of course will consume 

higher bandwidth. 

For EVBR, the video bitrates is based on normal VBR mode. 

However, the target bitrates can be increased while there are lots of 

motion in video. The maximum target bitrates will keep a pre-defined 

time period and then will be back to normal VBR mode. 

Max Frame Rate

 

Defines the targeted frame rate of this profile. For example, set the 

frame rate to 15 fps, then the image will be updated for 15 frames 

per second. User can set the desired max frame rate versus video 

quality under the limited bandwidth. 

GOP Control

 

Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, 

set the GOP to 30, then the video stream will have one Intra-frame 

every 30 frames. 

Audio 

Enable or disable the audio function. 

Multicast Video 

IP address and port for multicast video streaming of the selected 

profile. 

Multicast Audio 

IP address and port for multicast audio streaming of the selected 

profile 

Time to live 

Time to live (TTL) is a mechanism that limits the lifespan of data in a 

computer or network. Once the prescribed event count or timespan 

has elapsed, data is discarded. TTL prevents a data packet from 

circulating indefinitely. 

Warning!!! 

To enable the multicast streaming, make sure your Intranet does support multicast 

function. Otherwise, your Intranet may fall into network storm seriously.

 

3.8.5 AOI 

AOI means Area of Interest. Use this page to specify location and size of AOI windows. Only 
the profiles with H.264 codec and VBR rate control can support AOI function. It enables a 
non-uniform distribution of the image quality between a selected region (the AOI) and the rest 

 

52

Summary of Contents for ICA-3260

























































































Reviews:

No comments