manualshive.com logo in svg

Planet Networking & Communication ICA-3260, User Manual, Page: 42 / 88

Share
Download
Planet Networking & Communication ICA-3260 User Manual Download Page 42

 

60fps Full HD IR Bullet IP Camera 

ICA-3260

 

 

 

SMTP Notification (e-mail) 

If this function is enabled, the “

Send to

” and “

Subject

” field 

need to be filled. 

Send To 

Type the receiver’s e-mail address. This address is used for 

reply mail. 

Subject 

Type the subject/title of the E-mail. 

TCP Notification 

If this function is enabled, the “

TCP Server

“, “

TCP Port

”, 

and “

Message

” fields need to be filled. 

TCP Server 

Type the server name or the IP address of the TCP server. 

TCP Port 

Set port number of TCP server. 

Message 

The message will be sent to FTP server. 

HTTP Notification 

If this function is enabled, the fields below need to be filled. 

URL 

Type the server name or the IP address of the HTTP server 

HTTP Login Name 

Type the user name for the HTTP server. 

HTTP Login Password 

Type the password for the HTTP server. 

Proxy Address 

Type the server name or the IP address of the HTTP Proxy. 

Proxy Port 

Set port number of Proxy. 

Proxy Login Name 

Type the user name for the HTTP Proxy. 

 

38

Summary of Contents for ICA-3260

























































































Reviews:

No comments