Planet Networking & Communication ICA-1200 User Manual Download

Page: 72 / 92

Full HD PoE/ Wireless Cube IP Camera

ICA-1200/W1200

needs to specify a name for each FTP setting.

FTP Server

Type the server name or the IP address of the FTP server.

Test

Check the FTP server whether this account is available or not.

FTP Login name

Type the user name for the FTP server.

FTP Login Password

Type the password for the FTP server.

FTP Port

Set port number of FTP service.

FTP Path

Set working directory path of FTP server.

FTP Passive Mode

Select passive or active mode connecting to FTP server.

3.16.2 TCP Server

In addition to send video file to FTP server, the device also can send event message to specified
TCP server.

Name

User can specify multiple TCP servers as wish. Therefore, user
needs to specify a name for each TCP server setting.

TCP Server

Type the server name or the IP address of the TCP server.

TCP Port

Set port number of TCP server.

3.16.3 HTTP Server

The device also can send event message to specified HTTP server.

Summary of Contents for ICA-1200





























































































Search results

Summary of Contents for ICA-1200

Reviews:

Related manuals for ICA-1200

Brands by name

Popular brands

Planet Networking & Communication ICA-1200, User Manual

Search results

Summary of Contents for ICA-1200

Reviews:

Related manuals for ICA-1200

Brands by name

Popular brands