Planet Networking & Communication IAS-240 User Manual Download Page 9

Page: 9 / 97

ISDN Access Server User Guide

to do is install and configure the supplied software on
their PC.

Easy installation & configuration.

The "ISDN

Access Server Printer Port" software required for printer
sharing installs quickly and requires minimal configura-
tion.

Configuration & Management

Easy Setup.

Use your WEB browser from anywhere on

the LAN for configuration.

Remote Management.

The ISDN Access Server can be

managed, if required, from a workstation anywhere on the
LAN, using a WEB browser.

Remote Monitoring.

Internet access via the ISDN link,

or serial port usage, can be monitored from any worksta-
tion on the LAN.
Printer status can be checked using the standard Windows
printer features.

Security Features

Configuration Data

. Optional password protection is

provided to prevent unauthorized users from modifying
the configuration.

Firewall Protection.

All incoming data packets are

monitored and all incoming server requests are filtered,
thus protecting your network from malicious attacks from
external sources.

Summary of Contents for IAS-240


































































































Search results

Summary of Contents for IAS-240

Reviews:

Related manuals for IAS-240

Brands by name

Popular brands

Planet Networking & Communication IAS-240, User Manual

Search results

Summary of Contents for IAS-240

Reviews:

Related manuals for IAS-240

Brands by name

Popular brands