10
4. Hardware Installation
The following section describes the hardware installation of the BSP-360. Before
connecting any network device to the BSP-360, read this chapter carefully.
BSP-360
DC
DC
Battery
CAM1
CAM2
CAM3
Wireless CPE/AP
PoE
PoE
PoE
PoE
Ethernet Switch
Media Converter/
DC Powered Device
Monitoring Center
Solar PV
Turbine
DC
DC
Power Line (DC)
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
2.4GHz 802.11n
N
N
Please follow the following steps to install the system:
Step 1.
Install BSP-360
Place the BSP-360 in a desired location using the wall-mount fixtures.
Note
a. Please install the BSP-360 in a proper enclosure or shelter.
b. The BSP-360 must be grounded.