2
WLAN LED
On
– Wireless enabled.
Off
- No Wireless connections currently exist.
Flashing
- Data is being transmitted or received via the Wire-
less access point. This includes “network traffic” as well as user
data.
ADSL
On
- ADSL connection is available.
Off
- No ADSL connection.
Flashing
- Data is being transmitted or received via the ADSL
connection.
Rear Panel
Power port
Connect the supplied power adapter here.
10/100BaseT
LAN connections
Use standard LAN cables (RJ-45 connectors) to con-
nect your PCs to these ports.
Reset Button
(Reset to Defaults)
This button will reset the ADW-4302 to the factory default
settings.
To do this, press and hold the Reset Button for five (5)
seconds, until the Status LED is lit, then release the Reset
Button, and wait the ADW-4302 to restart using the factory
default values.
ADSL port
Connect this port to your ADSL line.
Installation Procedure
