Planet Networking & Communication ADW-4302 Manual Download Page 1

1

Package Contents

The following items should be included:

•  The ADSL2/2+ Wireless VPN Firewall Router Unit

•  1 Cat-5 Ethernet (LAN) cable

•  1 RJ-11 (ADSL) cable

•  Power Adapter

•  Quick Installation Guide

•  CD-ROM containing the on-line manual.

If  any  of  the  above  items  are  damaged  or  missing,  please  contact  your  dealer 
immediately.

Physical Details

Front-mounted LEDs

PWR LED

On

 - Power on.

Off

 - No power.

S T A T U S 
LED

Off

 - Normal operation.

Blinking

 - This LED blinks during start up, and during a Firm-

ware Upgrade. 

LAN

For each port, there are 2 LEDs, to indicate the connection speed 
(10Base-T or 100Base-T) of each port. 

• 

100 LNK/ACT

 - This will be ON if the LAN connection is us-

ing 100Base-T, and Blinking if data is being transferred via 
the corresponding LAN port.

• 

10 LNK/ACT

 - This will be ON if the LAN connection is using 

10Base-T, and Blinking if data is being transferred via the 
corresponding LAN port.

•  If  neither  LED  is  on,  there  is  no  active  connection  on  the 

corresponding LAN port.

Summary of Contents for ADW-4302







Reviews: