background image

Once you have the IP address go to a web browser and type the IP address into the address bar. When prompted for 

login the default username and password are as follows.

Once you are logged in the Planet eStream team recommend changing this password. You can change the password by 

going to System > Manage > Change Password. You can also shut down or reboot the device from the web interface by 
going to System > Manage > Restart.

Next if you go to System > Network this will give you a status of your network connection. You can change the network 
setup to be either DHCP or a static IP address by clicking the “Update” link on the left hand side. If you select Static you 
can enter your network details as required. 

Please note if you change the IP address the device will reboot and you will need to navigate to the new IP address to 
access the web interface again.

The next step would be to setup your tuners, the tuners will listen on frequencies for any broadcasting channels. To 
setup the tuners click the “Tuner” tab at the top. This will show you a drop down list of all the tuners available to you, and 

the status of each tuner when selected.

Username – 

webadmin

Password – 

webadmin

Summary of Contents for VBOX

Page 1: ...able at your location using your aerial the device does not come pre configured to work with your frequencies This is something that needs to be configured once the streaming device is installed and on your network The IPTV Streaming Device will first need a Cat 5e or Cat 6 Ethernet cable into the LAN connector on the back of the device to connect your network You can then plug in your Freeview or Sa...

Page 2: ...of your network connection You can change the network setup to be either DHCP or a static IP address by clicking the Update link on the left hand side If you select Static you can enter your network details as required Please note if you change the IP address the device will reboot and you will need to navigate to the new IP address to access the web interface again The next step would be to setup...

Page 3: ...you should see a list of all the channels available across all tuner devices you have setup To stream a particular channel simply enter a multicast IP address and a port and click the Start button for that channel This saves the configuration and will start to broadcast the channel over your network To stop a channel broadcasting simply click the stop button for the required channel If you require ...

Page 4: ...d this to your Planet eStream website to be seen as a Live TV channel which can then be viewed through the website and used in digital signage Firstly log in to your eStream website as an Administrator Then go to Tools Admin Media Management Custom Live Channels From this page you can click Add Custom Channel In the pop up window simply enter the name of the channel and the broadcast URL including...

Reviews: