13
36
Slide in CD/MP3 disc, unit will play it automatically. If disc is in slot, press DVD touch
button on main menu can to play.
1. Repeat Play
In CD/MP3 mode, press AMS/RPT button on remote control, to startup following, repeat
CD disc: Single song repeat
→
Repeat play off.
MP3
disc: Single song repeat
→
Directory repeat
→
Repeat play off.
2. Fast Forward/Fast Rewind
Press SEEK + / SEEK - button on remote control, or
/
touch button on display to
speed forward or backward playing.
Note: Hold above button a bit longer to operate.
3. Previous/Next Song Play
In playing mode, press SEEK + / SEEK - on remote control, or
/
touch button on
display to choose previous/next song.
4. Pause Play
In play mode, press
button on remote control, or
button on display to pause.
Press again to go back to normal play.
5. Stop Play
In play mode:
1) Press
button on remote control to enter the pause mode, the position will be stored
in unit. At that time, press button on remote control or touch button on display to
resume playing at the stored position.
2) Press
button on remote control twice to enter into stop mode, here, press
button on remote control or touch button on display, unit will play from the first song.
6. OSD
In playing mode, short press OSD on remote control to show all information of present
disc.
7. Randomly Play
In CD mode, press LOC/RDM button on remote control, to instantly play each song.
Press again to back to the normal play.
8. EQ Mode
1) This function can only be worked by remote control.
2) When playing CD/MP3, press the “ZOOM” button on the remote control, you can
choose the sound mode.
3) When enter this function, press the button
/
/
/
to move the course to select
sound mode which in the system menu, after your selection position will show red color
to indicate the confirmation.
9. OPEN
Press OPEN button on panel to eject disc.
17.CD BASIC OPERATION
Setup function operation
System Setup:Click this button,then input password"888888".Click "OK" into system
setup,press relevant button to choose on/off. Press "OK" button to confirm.
Touch Calibration:
Touch the center of "+" to calibrate when the position misgrated.
