background image

Planer plc reserves the right to alter products and their specifications without notice.

Good practice demands that in critical applications, reliance should not be placed on a single source of data. Hard
copies and backup copies should be routinely kept.

You may freely copy and distribute this document in any form provided that the document is reproduced in full and
includes these notices.  Individual pages and forms may be freely copied for the purposes of implementing any
instructions with the documentation   You may not make modifications or create derivative works.  Any modification to
these conditions requires the written permission of  Planer plc.

Product names and designations that are referred to in this document may be either trademarks and/or registered
trademarks and are recognised as the property of their respective owners.

This information is provided without warranty, express or implied, and including but not limited to any implied
warranties in respect of merchantability or fitness for any purpose, except to the extent that such provisions are held
to be void, in violation of applicable law or unenforceable in a specific jurisdiction.

Part Number: MA008019 Issue: 5.0  0 Printed: March 2013

Shipslog Safety Instructions

© 2013 Planer plc

Summary of Contents for Shipslog









Reviews: