Planar WN-5040-720, User Manual

Page: 19 / 153

8
2.1 What You Will Do
The series of steps here give only a basic outline of the installation process. See the specific sections for
details (page numbers in parentheses).
Installation
1. Unpack the Margays. Leave the screens in their
containers. You won’t need the screens for a
while.
2. If it was purchased, install the VIM (Video Input
Module) in each Margay. (10)
3. If it was purchased, install the Big Picture key in
each Margay. (12)
4. Build the wall of Margays, leaving the screens off.
(14)
5. Connect the Margays to power (26), picture
source (22 & 24) and communication. (28)
6. Install the screens, starting with the bottom row.
(32)
Configuration
1. Align each optical engine to the screen. (38)
2. Adjust Margay to each of the inputs you will use:
analog computer (44), digital (48), video (50).
3. Color balance the wall. (52)
4. Set up Big Picture, if you are using it. (54)
5. Save your work. (62)