Planar VM Series, User Manual

Page: 6 / 75

Introduction
Planar VM Series User Manual
020-1357-01D
Page | 6
1. Safety Information
Before using the Planar VM Series, please read this manual thoroughly to help protect against
damage to property, and to ensure personnel safety.

Be sure to observe the following instructions.

For your safety, be sure to observe ALL the warnings detailed in this manual.

For installation or adjustment, please
follow this manual’s instructions, and refer all
servicing to qualified service personnel.
2. Safety Precautions

If water is spilled or objects are dropped inside the display, remove the power plug
from the outlet immediately.
Failure to do so may result in fire or electrical shock. Contact
your dealer for inspection.

If the display is dropped or the chassis is damaged, remove the power plug from the
outlet immediately.
Failure to do so may result in fire or electrical shock. Contact your
dealer for inspection.
WARNING! Wall mounts must be secure.

If the display is hung on a wall, the wall must be strong enough to hold it. Simply
mounting it to wallboard or wall paneling won’t be adequate or safe.
Caution: The screen could be damaged by heavy pressure.

Slight pressure on the LCD will cause distortion of the image . Heavier pressure will
cause permanent damage. Displays should be mounted where viewers cannot touch the
screen or insert small objects in the openings that will create hazards by contacting bare
conductive parts.
Caution: The front polarizer is soft and subject to scratches from sharp objects.

The polarizer is a thin sheet of film laminated to the outside layer of glass on the LCD
screen
. Take care when handling items near the screen.

If the power cord or plug is damaged or becomes hot, turn off the main power switch
of the display. Make sure the power plug has cooled down and remove the power
plug from the outlet
. If the display is still used in this condition, it may cause a fire or an
electrical shock. Contact your dealer for a replacement.