Planar UltraRes, User Manual

Page: 32 / 152

Installing an UltraRes Display on a Wall
Planar UltraRes User Manual 32
7
If you have screwed the template in place, remove each screw and the
template.
8
Line up the middle hole of the top wall mount with the screw hole drilled
from the template.
Note: This picture shows mounts for a landscape installation.
9
Tighten the screw into the mount.
10
Use a level to make sure the mount is level.
11
Then install additional screws as needed.
Note: Screws installed near the mount hooks provide the best support.
12
Install the center screw in the bottom mount and repeat steps
10
-
11
for any
additional screws that you want to install. Note that there are open mount
channels on the brackets. So you can install the screws wherever necessary
along those channels.