background image

SD2320W 

| 3 | 

User's Guide 

A block diagram describing the process of driving a StereoMirror

 

monitor 

with a computer is shown in the illustration below.  The left eye and right eye 
images are sent to their respective AMLCDs independently and without any 
special treatment (with the exception of accommodating for the fact that  
the upper monitor is seen in a mirror; see discussion below).  Presenting  
the stereo pair of images requires a setup or software application that 
accommodates dual-monitor stereo viewing.  No additional modification  
is needed for use with the StereoMirror

 

monitor design.   

Any software application that uses the OpenGL quad-buffered stereo features 
is compatible with the StereoMirror

 

.  Quad-buffered stereo is a feature of 

the OpenGL 3D graphics library that allows an application to define two 
separate right/left eye viewpoints instead of the normal single monoscopic 
viewpoint.  The two viewpoints are defined to give the correct parallax 
separation for the 
proper stereo effect.  
Once the two 
viewpoints have been 
defined the 3D scene 
is rendered identically 
for each of the two 
viewpoints.  Many 
commercial 3D 
applications already 
have stereo viewing 
modes using the 
OpenGL stereo 
features.  

Since the upper 
display of the monitor 
is seen in reflection, a 
mirror-flip operation 
must be performed 
on that data path.  In 
the current product 
this is accomplished 
using an auxiliary signal processing board in the data path to the upper 
monitor.  Driving a StereoMirror

 

monitor is identical to driving a pair of 

projection displays used to show stereoscopic images with crossed polarizers 
in the two separate light paths.  An off-the-shelf, dual-output graphics card  
is employed to drive the two monitors, again with no special preparation.   

For more information on StereoMirror

 

technology, go to 

www.planar.com/advantages/whitepapers

.  

Left Eye 

Image

Dual output 

graphics card

Computer &  

Software 

Application

Mirror-flip 

PCI Card

StereoMirror™

Right Eye 

Image

Top 

Monitor

Bottom

Monitor

Left Eye 

Image

Dual output 

graphics card

Computer &  

Software 

Application

Mirror-flip 

PCI Card

StereoMirror™

Right Eye 

Image

Top 

Monitor

Bottom

Monitor

Driving the StereoMirror monitor. 

Summary of Contents for SD2320W





















Reviews: