background image

 

15

Care and Maintenance 

Care 

 

Avoid exposing your TFT LCD Monitor directly to sunlight or other heat source. Place your TFT 
LCD Monitor away from the sun to reduce glare. 

 

Put your TFT LCD Monitor in a well ventilated area.   

 

Do not place any heavy things on top of your TFT LCD Monitor. 

 

Make certain your TFT LCD Monitor is installed in a clean and moisture-free area. 

 

Keep your TFT LCD Monitor away from magnets, motors, transformers, speakers, and TV sets. 

Note 

 

Move the LCD out of the package and take off the plastic bag and Polystyrene Foam.   

 

Pull the base from Parallel versus Panel to Vertical. 

 

Adjust the Panel within 0(±2) degree leaning forward and 20(±2) degree leaning backward. 
You must bend harder to exceed 20(±2) degree backward but this range is for packing the 
unit to a small size for storage only. 

Safety Tips 

 

If smoke, abnormal noise or odor came out from your TFT LCD Monitor, caution you should 
remove the power cord immediately and call your service center. 

 

Never remove the rear cover of your TFT LCD Monitor cabinet. The display unit inside contains 
high-voltage parts and may cause electric shock to human bodies.

 

 

Never try to repair your TFT LCD Monitor yourself. Always call your service center or a qualified 
technician to fix it.

 

 

Troubleshooting 

No power 

 

Make sure A/C power cord is securely connected to the power adapter and the power supply 
is firmly connected to the TFT LCD Monitor. 

 

Plug another electrical device into the power outlet to verify that the outlet is supplying 
proper voltage. 

 

Make sure all signal cables are installed. 

Power on but no screen image 

 

Make sure the video cable supplied with the TFT LCD Monitor is tightly secured to the video 
output port on back of the computer. If not, tightly secure it.

 

 

Adjust brightness. 

Wrong or abnormal colors 

 

If any colors (red, green, blue) are missing, check the video cable to make sure it is securely 
connected. Loose or broken pins in the cable connector could cause an improper connection.

 

 

Connect the TFT LCD Monitor to another computer.

 

Summary of Contents for PX2710MW




















Reviews: